SVWare

Description

SVWare – Identifies working extension lines on a PBX. A working extension is one that can be registered. Also tells you if the extension line requires authentication or not.

Usage

Syntax

 svwar [options] target

Options

  --version             show program's version number and exit SVWare 
  -h, --help            show this help message and exit
  -v, --verbose         Increase verbosity
  -q, --quiet           Quiet mode
  -p PORT, --port=PORT  Destination port or port ranges of the SIP device - eg
                        -p5060,5061,8000-8100
  -P PORT, --localport=PORT
                        Source port for our packets
  -x IP, --externalip=IP
                        IP Address to use as the external ip. Specify this if
                        you have multiple interfaces or if you are behind NAT
  -b BINDINGIP, --bindingip=BINDINGIP
                        By default we bind to all interfaces. This option
                        overrides that and binds to the specified ip address
  -t SELECTTIME, --timeout=SELECTTIME
                        This option allows you to trottle the speed at which
                        packets are sent. Change this if you're losing
                        packets. For example try 0.5. SVWare
  -R, --reportback      Send the author an exception traceback. Currently
                        sends the command line parameters and the traceback
  -A, --autogetip       Automatically get the current IP address. This is
                        useful when you are not getting any responses back due
                        to SIPVicious not resolving your local IP.
  -s NAME, --save=NAME  save the session. Has the benefit of allowing you to
                        resume a previous scan and allows you to export scans
  --resume=NAME         resume a previous scan
  -c, --enablecompact   enable compact mode. Makes packets smaller but
                        possibly less compatible SVWare 
  -d DICTIONARY, --dictionary=DICTIONARY
                        specify a dictionary file with possible extension
                        names
  -m OPTIONS, --method=OPTIONS
                        specify a request method. The default is REGISTER.
                        Other possible methods are OPTIONS and INVITE
  -e RANGE, --extensions=RANGE
                        specify an extension or extension range  example: -e
                        100-999,1000-1500,9999
  -z PADDING, --zeropadding=PADDING
                        the number of zeros used to padd the username. SVWare
                        the options "-e 1-9999 -z 4" would give 0001 0002 0003
                        ... 9999
  --force               Force scan, ignoring initial sanity checks.
  -T TEMPLATE, --template=TEMPLATE
                        A format string which allows us to specify a template
                        for the extensions                       example
                        svwar.py -e 1-999 --template="123%#04i999" would scan
                        between 1230001999 to 1230999999"
  -D, --enabledefaults  Scan for default / typical extensions such as
                        1000,2000,3000 ... 1100, etc. This option is off by
                        default.                       Use --enabledefaults to
                        enable this functionality SVWare 
  --maximumtime=MAXIMUMTIME
                        Maximum time in seconds to keep sending requests
                        without                       receiving a response
                        back
  --domain=DOMAIN       force a specific domain name for the SIP message, eg.
                        -d example.org
  --debug               Print SIP messages received

Example

cyborg@cyborg:~$ svwar 192.168.1.111
| Extension | Authentication |
——————————
| 202 | reqauth |
| 203 | reqauth |
| 200 | reqauth |
| 201 | noauth |
0 Comments

Leave a reply

CONTACT US

We're are building as a community and a team. Be a part of it.

Sending

©2017 Ztrela Knowledge Solutions Pvt. Ltd

Log in with your credentials

Forgot your details?